DUOYI
DUOYI Low Current CLAMP Meter for Automotive Battery Leak Current 0mA-60A Dark current
DUOYI Low Current CLAMP Meter for Automotive Battery Leak Current 0mA-60A Dark current
Brief Introduction
This meter utilizes latest digit-integrated technology to auto recognize AC or DC. It features one auto-zero button instead of
rotating zero knob. Advantages including non-contact measurement, high accuracy, strong anti-interference, auto range
and portability benefit users operate measurement fast, safely and reliably.
It is most available for automotive repair industry and power related industry.
l Automotive Repair Industry
This meter is specially designed for measuring automotive leak current , consumption current, motor starting current and engine charging current.
l Power Related Industry
This meter rapidly check out problems such as cracked wire leak current, electric leak current, wire-iron contact, which matches needs of power maintenance industry.
Features
lAuto recognize AC or DC instead of pressing switch button manually.
lPressing ZERO/LIGHT button instead of rotating zero knob manually.
lRanging 0mA~60A AC/DC
lResolution 1mA AC/DC
lAccuracy ±2%rdg±5dgt
l99 sets,press HOLD/MEM/MR button to storage and number data for reviewing conveniently.
l Long press HOLD/MEM/MR button to enter data review, use ZERO/LIGHT and HOLD/MEM/MR button to page up or down for reviewing data. Long press HOLD/MEM/MR button to opt out.
Brand Name
|
DUOYI |
Model Number
|
Dy260
|
Display Type
|
Digital Only
|
Operating Temperature
|
below -10~50°C, below 80%RH
|
Dimensions
|
215*61*32mm
|
Weight
|
0.3kg
|
LCD size
|
35mm*21.5mm
|
Jaw size
|
Jaw size
|
Limit temperature error
|
-10~0°C and 40~50°C, the error MAX increases by 2%rdg
|
Insulation strength
|
AC 3700V/rms (between core and box)
|
Share
Great accuracy. However, poorly designed. When using the Light function, it stays on maybe 30 seconds. Unfortunately, the Light button is also the Tare button, so when trying to turn the light back on it often zeros out the reading, & it doesn't reset unless you turn it off then back on. When chasing a parasitic drain, this tool is very helpful but does not stay on long enough during diagnostic. The whole tool with shut off in less than 5 minutes, meaning needing to turn it back on & re-Tare it then reapply it in the proper circuit. It was a hassle to use, but the only tool I had that didnt require leads (more connection points) to test mA.
Newsletter
Subscribe to the email for more technical points and instant news.